Can Gorilla Glue Be Used On Carpet? [And How To Remove It]

Have you used Gorilla Glue on your carpet? Are you now looking to remove it but unsure how to do it? Well, you've come to the right place. Gorilla Glue is arguably one of the toughest and best quick-drying adhesives being sold today. We have researched how Gorilla Glue may be used on carpet and ways to remove it. In this post, we will cover them.

Gorilla Glue can be used on carpet to hold seams together. For example, if your carpet edges are beginning to become undone or lift away from the subfloor, Gorilla Glue can be used with small sections to help hold them in place.

However, it's also worth noting that this glue dries quickly, and if you need to remove it at some point later, you may need to use an adhesive removing solution to do so.

Here are a few options to consider:

Goo Gone
Acetone
WD-40
Olive Oil
Citrus Fruit

Before applying Gorilla Glue to your carpet, it's important to consider whether or not you'll need it to remove the glue at some point. For example, if you intend to replace the carpet in a few weeks a month, he may want to find a lighter glue. Continue to use for removal.

Methods for Removing Gorilla Glue From Carpet

Goo Gone

Goo Gone is a safe and simple way that you can remove Gorilla Glue from your carpet. It's a citrus-based adhesive remover, and you can also use it to remove glue from other surfaces as well. Below is how you can remove it from your carpet:

Use a cleaning cloth or a few cotton balls to wipe the affected area with the Goo Gone solution. Be sure to apply a liberal amount of solution.
Rub the solution into the carpet for about two to three minutes to penetrate the affected area fully.
Next, let the Goo Gone sit on the carpet for about 7 to 10 minutes.
Afterward, try to break up the fibers using your fingers. Apply more solution and let it sit another 10 to 15 minutes if you can.
Once you're able to remove the glue, wipe the carpet down using soapy water. Rinse it and let it dry.
If needed, use a carpet brush to help blend the area after the carpet has dried.

Acetone

Acetone is a strong but colorless compound that can remove different types of solvents, including Super Glue and Gorilla Glue. You usually hear people refer to acetone when removing acrylic nails, but you can also use it to remove Gorilla Glue from the carpet without damaging it. Here are the steps to get it done:

First, try to cut out any carpet fibers that are glued down, if possible.
Next, use dish soap and a clean cloth to apply warm soapy water to the carpet area and let it soak for about 5 minutes.
Using a circular motion while the carpet is still damp, use cotton balls or another cleaning cloth to rub acetone over the affected area.
Continue this process for 5-7 minutes until you notice the glue beginning to break down.
Afterward, repeat the steps as necessary and then wipe the affected area down with a damp cloth to remove the soap and acetone.

Find acetone on Amazon.

WD-40

WD-40 is a silicone-based metal cleaner that can also be a powerful adhesive remover. The great thing about WD-40 is that you likely already have this in your home or car, and it's relatively inexpensive and easy to find. Here's how to use it on your carpet:

Spray the WD-40 on the affected area of the carpet. If you have the can with the straw sprayer, be sure to use it. If not, you may want to lay a paper towel or other item on the other areas of the carpet to avoid spraying them accidentally.
Next, let the solution sit on the carpet for about 7 minutes. Then, use your fingers to break up the fibers on the carpet. Apply more solution if needed and let it sit for an additional 7 minutes.
Afterward, use warm soapy water (preferably dish soap) to remove the WD-40 from the carpet.

Check out this WD-40 set on Amazon.

Olive Oil

Oils work wonderfully to remove adhesive as they can aggressively break down the chemicals in the glue to loosen the bond between them and a surface. Olive oil is excellent to use because a little can go a long way. However, you can also use other oil types, including canola, corn, almond, and vegetable oil.

Be cautious when using this method, as you can easily stain the carpet during the process. Let's take a look at how it's done:

Start by pouring half a tablespoon of olive oil onto a cleaning cloth.
Next, rub the affected area gently in a circular motion starting from the outside. Work your way to the inside to prevent getting the oil on other areas of the carpet.
Let the oil sit on the carpet for about 5 minutes. Try to physically pick the glue away with your hand or use a thread remover [be careful with this method to avoid damaging the carpet].
After effectively removing the glue, use dish soap to thoroughly clean the area and prevent the oil from staining the carpet.
Once the carpet dries, use a carpet brush to blend the affected area with the rest of the carpet.

Find olive oil on Amazon.

Citrus Fruit

Citrus fruit including, oranges, limes, and grapefruit, all contain citric acid. The acid effectively removes glue as it breaks down the materials in it. This allows the glue to be easily removed from most surfaces, including carpet. Here are steps to use it for carpet removal:

Slice a piece of citrus fruit in half.
Squeeze the juice from the fruit into a small bowl.
Use a cleaning cloth to rub the juice over the area containing the glue. Do this for about 5 to 10 minutes.
Let the glue sit on the carpet for an additional 5 minutes. Next, wash the area with warm soapy water.
Repeat these steps if necessary.

How Long Does it Take for Gorilla Glue to Dry on Carpets?

Usually, within a few seconds. Gorilla Glue is formulated to dry relatively quickly, and if you use just a few drops, it can be dry in as little as five to 10 seconds. However, large amounts of glue will generally take 30 to 60 seconds to dry completely.

So, if you're going to use it on your carpet, be sure to use the proper precautions to avoid gluing the wrong areas together.

What Glue is Best For Carpet?

You have a few options at your disposal when it comes to glue and carpet edges to one another. For example, you can use binding tape, clear gorilla glue, or carpet seam sealers.

Gorilla Clear Glue

As mentioned earlier, Gorilla Glue works wonderfully for combining carpet edges and seams. The best version to use is clear Gorilla Glue, as it dries completely clear and isn't as thick as the commonly used yellow version.

This version is a bit thinner, making it perfect for carpets and other applications where spaces may be smaller. It doesn't foam, dries clear, and can be removed using most solvents. It's also water-resistant and able to hold together various carpet textures.

Click here to see this glue on Amazon.

Do-it-Yourself Binding Tape

You may have heard of Instabind, which is very similar to this type of binding tape. This tape allows you to quickly and easily combine your carpet edges using a solid adhesive within a matter of seconds. This is considered a pressure-sensitive adhesive, and it can work on all types of carpets.

Click here to see this binding on Amazon.

Roberts Universal Carpet Seam Sealer

Here is an excellent carpet sealer to use if you're working on large areas. For example, if you have large rooms where you'll need to combine several feet of carpet, this product is ideal.

The sealant dries completely clear, and it doesn't heal once it's cured on the edges. If you're looking to prevent carpet fraying and delamination, here is a great option to consider.

Click here to find this sealer on Amazon.

What Gets Gorilla Glue Out of Carpet?

There are several commercial and all-natural adhesive removers that you can use to get Gorilla Glue out of your carpet. Common ones and clues citrus-based solvents such as Goo Gone or acetone, olive oil, and WD-40.

Does Isopropyl Remove Gorilla Glue?

Yes. Rubbing alcohol can also remove Gorilla Glue in the same way that acetone can. It helps to break down the glue and loosen its binding agents. It's especially effective for removing Gorilla Glue from the skin.

To use it, you simply need to soak your skin or the affected material in soapy water for about 5 minutes. Next, use a cleaning cloth or cotton balls to apply the rubbing alcohol to the area until the adhesive dissolves. You may need to perform several steps of this process for larger areas.

Wrapping Things Up

As you can see, you have several options at your disposal when it comes to removing Gorilla Glue from your carpet. Always remember to use any type of strong adhesive with caution and consider what removal method can be used beforehand.

Before you go, be sure to check out our other posts:

How To Put Carpet Over Laminate Flooring

How To Staple Carpet Padding