How To Use Milwaukee Hole Dozer [Step By Step Guide]

Milwaukee Tool has developed a quality hole saw called the Hole Dozer. This tool efficiently cuts through wood, metal, fiberglass, cement boards, and tile. If you are looking for a guide to using a Milwaukee Hole Dozer, you are in the right place. We have done research to come up with easy steps for you.

The Milwaukee Hole Dozer is available in a kit that includes hole saw blades in different sizes. To use your Hole Dozer, follow these easy steps:

  1. Choose the right size saw blade
  2. Assemble the hole saw
  3. Mark the area for drilling
  4. Create a pilot hole
  5. Start drilling

These are the basic steps for using the Milwaukee Hole Dozer. In this post, we will provide details on each step. We'll also provide tips on drilling holes and maintaining your hole saw. Keep reading to get more information on these topics.

An Overview Of The Milwaukee Hole Dozer 

There are several manufacturers of hole saws on the market. Milwaukee Tool is just one of them. However, they have come up with the Hole Dozer, which is considered the most durable hole saw on the market. 

The Milwaukee Hole Dozer is built to last and is covered by a lifetime warranty. Milwaukee Tool manufactured the Hole Dozer with durability, a long lifespan, and easy plug removal in mind. 

Because it is durable, the saw can cut through a variety of materials. It can be used to cut through soft or hard surfaces with different thicknesses. 

The Hole Dozer is made with carbide teeth, making it more durable for cutting highly abrasive material. This also lessens the friction and drag during cutting, resulting in fast and efficient sawing.

You can use the Hole Dozer to effectively cut through nail-embedded wood, stainless steel, cement board, plaster, and more. 

How To Use A Milwaukee Hole Dozer

A carpenter works with a manual power tool, close-up, How To Use Milwaukee Hole Dozer [Step By Step Guide]

The Milwaukee Hole Dozer kit has different blade sizes that you can use for different drilling purposes. Using the tool is not very difficult, but you should note that it is important to properly set up the hole saw for it to work efficiently.

1. Chose The Right Size Blade

A set of hole saws in different sizes for cutting holes in wood and drywall

First off, you need to pick the right size hole saw blade for the job. The Milwaukee Hole Dozer kit includes small and large blades to cover all of your needs, whether it's boring a doorknob hole, a pipe hole, or a conduit hole.

The hole saw blades have labels on each side so you can identify the size easily.

Click here to see this Hole Dozer set on Amazon.

2. Assemble The Hole Saw

The next step is to attach the hole saw blade to the drill.

The pilot bit should be inserted into the back of the hole saw first. After that, screw the hole saw into the arbor's thread. Make sure that the pins are aligned with the holes at the back of the hole saw. When they're aligned, push the collar upward to lock the hole saw in place. 

Once the collar is in place, tighten the nut behind it securely. You may need to use a wrench for this. Now you are ready to insert the shank into the drill.  

You can also use an arbor adapter for a Milwaukee Hole Dozer. The adapter is meant to be attached to small threads, so you can use hole saws that are 1-1/2''.

To attach the adapter, you need to insert the pilot bit through its flat end. After that, screw the adapter onto the arbor's thread. Make sure that it is secured in place. Then screw the hole saw into the arbor adapter thread until it is safe and tight.

3. Mark The Area For Drilling

Before starting the drill, make sure that you have measured and marked the area you're cutting. You don't want to have to patch different holes because you miscalculated the measurements.

4. Create A Pilot Hole

Mark the center of the hole. This small hole will serve as a guide for the drill bit. It'll make the cut more precise. If possible, create pilot holes on both sides of the material to be cut.

5. Start Drilling

Old wooden door with metal knocker

Get a good grip on the drill to operate it. Before the hole saw hits the surface, the bit will guide it first.

You don't have to push the drill hard. The Hole Dozer will cut through the surface without needing a great deal of force. Steady pressure applied at a 90-degree angle will keep the saw from binding.

There may be instances when you need to move the drill back and forth, especially if the surface is thick.

If you're cutting through smaller pieces of material like wood, and the holes need to look neat, place a backer board under the material to be cut. The backer board will prevent splinters on the other side of the workpiece and protect your work table.

Once you have successfully bored a hole through the surface, you should let the Hole Dozer cool down. The tool will be hot after use, so try not to touch it for a few minutes. 

Tips For Maintaining Your Hole Saw

The Milwaukee Hole Dozer is durable and covered by a lifetime warranty. However, these are not excuses for letting the saw be until your next use. Regular maintenance is key to keeping the tool in its best condition for a long time. 

  • Regular cleaning will keep the hole saw in top shape. After each use, wipe off any dust or chips, as these can damage the saw. When subject to friction, this debris can also cause the saw to burn.

Click here to see this cleaner on Amazon.

  • Do not forget to remove the plug after use. The Milwaukee Hole Dozer has an access slot on the side called the Plug Jack. This enables users to easily remove the cut material or plug without having to disassemble the entire tool.  
  • Lubricate the saw as needed. Use a cutting oil that will help minimize friction on the cutting metal. 

Click here to see this cutting oil on Amazon.

  • Store your hole saw in a dry place. The Hole Dozer kit comes in a case that holds all the saws and mandrels. Do not forget to put the saw back in place after use and cleaning.

Pros and Cons Of Using A Hole Saw

Red drill bit for drilling round holes in metal and other materials

A hole saw is helpful in many ways. It is mainly used to create holes without cutting the core material. It is efficient and effective as well. A hole saw is also more budget-friendly than boring bits.

One disadvantage of a hole saw is that it needs to be attached to a drill. The drill needs to be able to produce torque at low speed.

A hole saw also has a tendency to get stuck when choked with dust or particles from the material being cut.

Hole saws also tend to have burn marks. Moreover, the plug can get stuck inside a hole saw, especially if the saw doesn't have slots for plug removal. 

The depth of the hole to be cut depends on the whole length of the hole saw. It may not be applicable for deeper cuts. 

Final Thoughts

Hole saw kit for wood

Cutting a hole through different materials is not difficult, especially when you have the right tools and you know the proper techniques.

A Milwaukee Hole Dozer is a great tool to have for cutting holes. It is easy to assemble and use, and you'll be able to take advantage of its efficiency for a long time with proper maintenance.

In this post, we discussed the steps for using the Milwaukee Hole Dozer in detail. With this knowledge, you'll be able to confidently use your hole dozer for DIY projects.

If you found this post helpful, be sure to check out these other articles:

How Big Is A Deadbolt? [What Size Hole To Drill?]

What Size Hole Saw For A Deadbolt?

Share this article

Leave a Reply

Your email address will not be published. Required fields are marked *