How Much Does It Cost To Install A Bathroom Sink And Faucet?

We may get commissions for purchases made through links in this post.

How much does it cost to install a new bathroom sink and faucet? You know that renovations are not without a price tag. Luckily, renovations come in a range of options and costs. We’ve researched to find the price range of installing a new bathroom sink and faucet.

Bathroom sinks and faucets can be as cost-effective or as luxurious as you want, but a typical range is as follows:

  • The cost of a bathroom sink ranges from as low as $60 to as high as the thousands.
  • The cost of bathroom faucets starts at around $60 and goes into the thousands.
  • Installation for a new bathroom sink and faucet can run from $100, for DIY installation, to up to about $1,000, depending upon the complexity of the install.
  • At the very lowest end, you could install a new sink with fixtures for about $250, and at the highest end, into the thousands.

Let’s take a look at the specifics along with answering some of your other questions. We’ll examine the difficulty of replacing a bathroom sink and if you can do it without also replacing the countertop. We’ll talk about which sinks are hardest to install and if one material is better than another. Then we’ll look at faucets, which ones are the best quality, how hard they are to replace, and why they can be so expensive. So please, keep reading to find out more.

Modern elegant contemporary bathroom with a minimalist approach to the design, How Much Does It Cost To Install A Bathroom Sink And Faucet?

The Cost Of Installing A Bathroom Sink And Faucet

When you’re exploring the costs of installing a bathroom sink and faucet, there are several components you must keep in mind: the sink, the faucet, any accessories, and the installation costs. Each of these comes with a different price tag that can vary widely. If you are working on a budget, there are ways to do it efficiently. And if your budget is the moon, then you can get very fancy sinks and faucets with complex installation processes.

Bathroom Sinks

Bathroom sink come in a range of prices. This mini pedestal porcelain sink comes in well under $100. But along with it, you will need to buy a vessel sink drain which will cost another $20 to $50 depending upon your choice.

Click here for this on Amazon.

An average bathroom sink from a reputable brand like Kohler will cost a couple of hundred dollars, give or take some, depending upon the style. But with their products you have a good warranty should you end up with a problem.

Click here for this popular Kohler sink on Amazon.

If you love luxury, then maybe you want a bathroom sink that is nearly one of a kind. Something artisan created and made of a metal like bronze or copper is the thing that will elevate your style. A one-of-a-kind sink is likely to set your budget back by several thousand dollars, but you can rest assured your bathroom will set style standards.

Click here for this handcrafted brass sink on Amazon.

Is It Hard To Replace A Bathroom Sink?

Replacing a bathroom sink on a countertop is not terribly difficult. You might not even have to unhook the fixtures, depending on your setup. You will need to first cut off the water supply under the sink because once your drain is unhooked, you don’t want spills. The next step is unhooking the drain from the PVC piping. When the drain is unhooked, any screws unscrewed, and sealant cut with a utility knife, you can lift the sink out of the existing hole if you have a countertop.

If you have a pedestal sink, then it’s a matter of replacing the pedestal. For most pedestal sinks, you will also need to undo the fixtures unless you’re replacing the whole thing.

Once the sink is removed, and if you’ve bought a new sink that is the same size, then you can simply fit it into place. If you’ve bought a larger sink, you’ll need to cut a larger hole. Of course, if you have any questions about correctly cutting off the water supply, connecting and reconnecting the pipes, then it’s always a good idea to check in with a plumbing professional.

Interior of a narrow bathroom with a contemporary design

Can You Replace A Sink Without Replacing The Countertop?

If you’re not changing the size or placement of your sink, then you can simply change out the vessel. But if the size of the sink is smaller or larger, you may need to replace your countertop, especially if you have a stone counter. If your bathroom counter is a laminate material and you’re putting in a larger sink, you may just be able to cut a larger hole for the vessel.

What Is The Best Material To Use For A Bathroom Sink?

Most bathroom sinks are either ceramic, coated cast iron, or a molded quartz. All are good to use because they hold up to regular use and are durable and watertight. There are other materials like glass, copper, and brass, but all of these will take a bit of extra care to keep looking clean and gorgeous.

Click to see this Quartz composite sink on Amazon.

Which Type Of Bathroom Sink Is Hardest To Install?

Probably the most difficult type of bathroom sink to install is the farmhouse or apron-style sink. This is because of the modifications needed for the vanity base to support this type of sink. The second most difficult is the vessel sink. These often use interesting artistic bowls, and it may be a challenge to find ways to not let the nuts and bolts of the plumbing show. You may also need a very specific faucet height for these types of sinks to work.

Bathroom Faucets

Bathroom faucets typically come in one-hole or three-hole styles, and each is available in a wide range of finishes and design styles. Often the sleeker, more modern faucets come with a heftier price tag, but that’s not always the case. Let’s take a look at a few different designs and see what we’ve got.

A classic three-hole faucet like this is super affordable. This type of style is available from many different manufacturers and in different finishes. This one, shown in brushed nickel, is less than a hundred dollars and comes with the sink drain.

Click here for this on Amazon.

For a mid-range faucet budget, you might choose a known brand like Moen or Kohler. This contemporary beauty in black is available from Moen in the couple of hundred dollar range.

Click here for this on Amazon.

And if you’re looking for ultra-luxury, here’s a high-end faucet to knock your socks off. Faucets by known brands like Kohler come with great warranties and well-made components.

Click here for this on Amazon.

Is It Hard To Replace A Faucet?

Removing a faucet isn’t as hard as you think it might be. Your first step is to turn off the water supply beneath the sink, then open the faucets to let excess water drain out. You’ll need to gather a few tools: a basin wrench, adjustable wrenches, a bucket, and some rags, maybe even a putty knife. The next step will be to disconnect the supply lines, then lift out your faucet. Then when you’re ready, remove the drain. You’ll need your bucket there to catch any water that might be lingering in the P-trap.

If you’re keeping your existing sink, use some mineral spirits and a rag and clean up any gunk or putty that may be around the hole openings for the faucet and drain. Then you’re ready to reverse your steps and install your new faucet. There’s a super handy guide for this at the Lowes website.

Contemporary interior of a modern bathroom with long span mirror and a minimalst sink and granite countertop

What Is The Best Quality Bathroom Faucet?

Quality bathroom faucets are an important part of your bathroom renovation. A quality faucet comes with quality parts and fittings that close tightly, and the metal doesn’t crack. Some brands that signify quality in your bathroom faucets are Delta, Moen, Pfister, and Kohler. With any of these faucets, you should have both a good warranty and a nicely working faucet.

Here’s a unique faucet from Pfister. Click here for this on Amazon.

Here’s a beautiful faucet from Delta. Click here for this on Amazon.

Why Are Bathroom Faucets So Expensive?

Quality bathroom faucets are expensive for a couple of reasons. One reason is design. If you find a bathroom faucet that is unique and beautiful, chances are a bit more went into the casting and machining of the parts. The metal is heavier, it will be scratch-resistant, and it may even have smart technology.

The second reason is the internal fittings. A good faucet is going to have quality materials used for its internal fittings. This is what keeps it working smoothly for years and not developing leaks due to faulty materials or flaws from cheap manufacturing.

Accessories And Installation

When installing your sink and faucet in your bathroom, the final part of the equation is the cost of any accessories and the installation. Even if you do it yourself, you may need to buy some PVC pipe or supply line material. Some sink basins or faucets do not include drains, so you’ll need to purchase those separately. And if you have to replace your countertop, that’s an additional cost. If you need to hire a plumber, their hourly charge will probably average somewhere between $45 to $200 per hour, depending upon your location.

The Budget Is In Your Hands

Installing a new sink and faucet is a way to have an exciting upgrade to your bathroom. But the budget is entirely up to you. If you’re at all handy, you should be able to do a large portion of the work yourself with some ingenuity and the right research.

If you found this post helpful here at Uooz, please check out a few other posts to help out around the house.

Should You Caulk Around A Bathroom Sink Faucet?

How To Connect PEX To Sink Faucet In The Bathroom Or Kitchen?

Leave a Reply