Do you sometimes find it hard to push your Shark vacuum against your living room carpet? Do you want to adjust the height settings, but you can't find the right knob? Does it have a height adjustment, to begin with? We asked the experts regarding this, and here's what they said.
Shark vacuums do not have a specific knob for height adjustment. You can just choose between two types of floor settings, bare and carpet, on the control panel. When you choose the carpet setting, the unit's brush roll will spin faster to collect all the dirt, dust, and debris at the bottom of the carpet.
Keep on reading so we can tell you more about how to adjust the settings of your Shark vacuum cleaner according to the height of your carpet. We'll also share with you some vacuum troubleshooting tips to have it back in great working condition in no time. We'll also discuss if Shark vacuums have a warranty and how long they're expected to last. Let's get started!
Can you adjust the height of a Shark vacuum?
Vacuum cleaners are every homeowner's best friend, more so for those with carpet flooring. They help keep the carpet clean from top to bottom to prevent the buildup of dirt, grime, and allergens. They also ensure that the carpets maintain their beauty and always look presentable at all times.
However, carpet flooring comes in different heights that range from low to high.
- The height of low-pile carpets is less than 1/4-inch.
- Medium-pile has a height of 1/4 to 1/2-inch.
- High-pile carpets come with a height of 1/2 to 3/4-inch.
We're referring here to the tuft rising from the carpet's backing.
In general, the longer the pile is, the softer and more comfortable the carpet is; that's why more buyers prefer high-pile carpets for their homes. However, they have different requirements for cleaning to keep their long and fluffy threads pleasing to one's touch and sight.
Consequently, you need to adjust the height settings of your vacuum cleaner as you use it on bare or low-pile carpet flooring to one with a longer length of fibers. This will ensure that you don't damage the carpet's surface that you're cleaning.
You won't get stuck while using the properly adjusted vacuum. All the dirt at the bottom is cleared, and you can finish the chore smoothly.
Some vacuums have a knob for height adjustment, but Shark vacuums don't have one. Instead, you can just choose between bare floor and carpet settings from the control panel located at the top portion of your appliance.
There's a button for floor type to select which one you'll use accordingly. The icon for the bare floor or carpet flooring is also shown on the panel.
With the bare floor setting, the vacuum's brush roll turns slowly tocatch the dirt on hard floors or short pile area rugs. When you choose the carpet setting, the brush roll will now rotate faster as it collects debris underneath the carpet.
If you find it hard to move the vacuum cleaner across the carpet area, you can adjust the suction setting to a minimum. This will allow you to maneuver the appliance more efficiently. By putting your vacuum on the carpet setting and lowering its suction power, you'll be able to run it through high-pile carpets effectively.
Does a Shark vacuum have a reset button?
If your Shark vacuum cleaner won't start or has overheated, you can reset it first before contacting the company for support. Rebooting the system is the first thing that you should do whenever you encounter issues with your vacuum cleaner. Sometimes it is all that's needed to resolve internal issues, such as having trouble getting it to run.
Your Shark vacuum doesn't come with a reset button. Here's what you can do instead.
- You have to put its power button on the 'O-Off' position before removing its plug from the socket.
- Wait for a few minutes to an hour or until the appliance has cooled down completely before you plug it in again.
- While waiting, you can clear the hose from any blockages.
- Empty the dust cup of all dirt and debris.
- Clean the filters by rinsing them with water.
- Check if there are obstructions in the floor nozzle, wand, and handheld vacuum.
- Put everything back together, making sure that all parts securely click into place.
- Plugin the vacuum to test if it will turn on.
Sometimes your Shark vacuum will just need time to reboot, and it'll be back to work right after.
Why did my Shark vacuum lose suction?
If your Shark vacuum loses suction, it won't be able to pick up dirt and debris on the floor. There could be several reasons for this, such as the dust cup is already full, dirty filters, obstructions in the vacuum, a damaged hose, or a bad motor.
Here's what you can do about it:
Dust cup is full
- Pull out the dust cup from the handheld vacuum.
- Push the 'Empty' button and gently tap the screen inside to remove all the dirt.
- Reinstall the dust cup into the vacuum.
Dirty filters
- Remove the dust cup. This will expose the foam and felt filters of your vacuum.
- Pull the filters out.
- Rinse them with water until they are completely clean.
- Let them dry.
- Put the filters back to see if the suction will work.
- If it still won't work, you might need to replace the filters.
Obstructions in the vacuum
- Check the dust cup air duct and the brush roll's intake opening for any blockages.
- Remove the dust cup to disconnect the hose and reach the air duct.
- Clear the air duct of any unwanted particles.
- To determine if there are clogs behind the brush roll, set the vacuum down.
- Look through the opening right behind the brush roll. You might need to use scissors to cut through the accumulated debris and clear the opening.
Damaged hose
- Check the hoses between the main vacuum head and base and between the handle and wand.
- Look for signs that they are worn out, such as cracking and peeling. But some cracks are very small and might not be visible to the naked eye.
- Order your hose replacement from Shark or trusted dealers.
Check out this vacuum floor nozzle hose replacement on Amazon.
Bad motor
If none of the solutions offered above seem to work, it might be a sign that your vacuum cleaner's motor has gone bad. You may try to have it replaced or just get yourself a new one since it'll cost almost the same.
How long do Shark vacuums last?
Shark is one of the most trusted brands when it comes to vacuum cleaners. It is manufactured by SharkNinja Operating LLC. Through their constant innovation, they are able to develop powerful vacuums that come at competitive prices.
In terms of longevity, Shark vacuums are expected to last between five and seven years. While this doesn't meet the average eight-year life expectancy of vacuum cleaners, it is an understandable tradeoff since these appliances come with a more affordable price tag compared to other big brands out there in the market.
SharkNinja also offers a limited warranty for each of its products. The warranty period would depend on the vacuum type and model. For example, they offer a five-year limited warranty for their Shark Vertex Upright Vacuum but only a two-year warranty for their WANDVAC Cordless Handheld Vacuum.
Since they have been in the business for almost three decades, many people have experienced using SharkNinja products to attest to their reliability and performance. This is why Shark always fares well in customer satisfaction survey ratings.
In a recent survey, 91% of the participants said they were still using the vacuum cleaners they purchased way back in 2011. This means that with the right use and proper maintenance, Shark vacuums can last longer than five to seven years.
Should there be issues and you need to replace certain parts of your Shark vacuum, you can buy parts and accessories from their website to extend the life of your appliance.
Final Thoughts
Cleaning carpet floors are made simpler and easier by Shark vacuum cleaners. Just choose the carpet setting, and it will get the job done, no matter what the height of your carpet pile is.
For more resources about cleaning your carpet, you may visit the following links:
Carpet Smells Of Urine After Cleaning? Here’s Why
Can You Use A Carpet Cleaner On Your Couch?