The Honda GX390 is a popular engine that is used in several different applications. However, if you are the new owner of one, you may need to know how much oil it takes and what kind of oil to use. We did the research to bring you the answer.
The Honda GX390 engine requires 1.16 quarts (1.1 liters) of oil. The type of oil that should be used in this engine is 10W-30 motor oil. Consumers should change the oil every 6 months or 100 hours, whichever comes first.
In order for your Honda GX390 to perform at its best, it is important to use the correct type and amount of oil. If you still have some questions about this small engine, don't worry. In this post, we'll discuss the topic in more detail. In addition, we'll answer other frequently asked questions about the Honda GX390 engine, so keep reading!
How Much Oil Does The Honda GX390 Engine Need?
The Honda GX390 engine can be found in a variety of applications, such as generators, pressure washers, and water pumps. Like any engine, oil is required for proper lubrication and cooling. The Honda GX390 engine takes 1.16 quarts (1.1 liters) of oil.
A general rule of thumb is to change the oil every 6 months or 100 hours, whichever comes first. However, if you use your Honda GX390 engine in dusty or dirty conditions, you may need to change the oil more frequently.
It is important not to overfill the oil, as this can cause damage to the engine. If you find that your Honda GX390 is smoking when starting, then that is a sign that too much oil has been added.
Even if you don't use your Honda GX390 engine often, it is still a good idea to change the oil at least once a year. This will help to prevent any buildup of debris or sludge that can occur over time.
Oil degrades over time, so it is also important to use fresh oil. If you are unsure of how old the oil is, it is best to err on the side of caution and change it.
How Do I Know If My Honda GX390 Engine Is Low On Oil?
If your Honda GX390 engine is low on oil, you may notice some of the following symptoms:
- Engine runs louder than usual.
- The engine produces more smoke than usual.
- The engine is harder to start.
If you notice any of these symptoms, check the oil level as soon as possible. If the oil level is low, add more oil until it reaches the full line on the dipstick.
It is also a good idea to check for leaks. If you notice any oil leaks, have them repaired as soon as possible. By keeping your engine properly lubricated, you can help to ensure that it runs smoothly and efficiently for years to come.
What Type Of Oil Should I Use In My Honda GX390 Engine?
The recommended oil for the Honda GX390 engine is 10W-30 motor oil. This type of oil provides the best protection for your engine, even in tough operating conditions.
If you are using your Honda GX390 engine in a cold climate, then you may want to use 5W-30 oil instead. This type of oil is thinner and will flow more easily when the temperature is cold.
It is important to avoid using oils that are not designed for engines, such as hydraulic oil or transmission fluid. These oils can damage your engine and void your warranty.
If you are still unsure of what type of oil to use, consult your Honda GX390 owner's manual.
Does Oil Viscosity Matter In A Honda GX390?
Just like vehicle engines, small engines need the right oil viscosity to run correctly and efficiently. But what is the oil viscosity, and why does it matter?
Oil viscosity is a measure of how easily the oil flows. The higher the viscosity, the thicker the oil.
Thinner oils are typically used in cold weather because they flow more quickly and can provide better protection for engine parts. Conversely, thicker oils flow more slowly and are better suited for warmer weather.
For example, if you have a generator equipped with a Honda GX390 engine and start it in sub-freezing temperatures, you will want to use an oil with a lower viscosity.
However, if you are starting your generator on a hot day, you might prefer an oil with a higher viscosity.
Can You Use Synthetic Oil In A Honda GX390 Engine?
Yes, you can use synthetic motor oil in your Honda GX390 engine. First, however, you should check your owner's manual to see what the manufacturer recommends.
In general, synthetic oils flow more easily than conventional oils and can provide better protection for engine parts in extreme temperatures.
They flow more easily at lower temperatures and can provide superior protection against wear and tear. Synthetic oils can also help prolong your engine's life by keeping it cleaner for longer.
Whether you use the engine a lot or a little, synthetic oil can help to keep your Honda GX390 engine running like new.
How Do I Change The Oil In My Honda GX390 Engine?
Even though the Honda GX390 engine can be found in different types of equipment, the process for changing the oil is generally the same.
- First, you will need to locate the oil drain plug and remove it. Be careful not to lose the washer that is attached to the plug. Once the plug is removed, allow the oil to drain into a catch pan.
- Next, you will need to remove the old oil filter. To do this, you will need an oil filter wrench. Once the old filter is off, wipe any debris from the mounting surface.
- Now you can install the new oil filter. Be sure to use a new washer on the drain plug and screw it back in.
- It is now time to add the new oil to the engine. First, check your owner's manual for the recommended amount and type of oil. Once the oil is added, start the engine and check for leaks. The oil level should be checked when the engine is cold and on a level surface.
- Finally, start the engine and let it run for a few minutes. This will help to distribute the oil evenly throughout the engine.
- Once the engine has been running for a few minutes, shut it off and recheck the oil level. Add more oil if necessary.
If you are not comfortable changing the oil yourself, you can always take it to a local dealer or mechanic.
How Often Should I Service My Honda GX390 Engine?
In addition to changing the oil, it is important to perform other routine maintenance on your Honda GX390 engine.
The frequency of servicing will depend on how often you use the engine. However, as a general rule of thumb, you should service your Honda GX390 engine every 6 months or 100 hours, whichever comes first.
If you use your engine in dusty or dirty conditions, you may need to service it more frequently.
Some of the things that should be done during service include:
- Cleaning the air filter.
- Checking the spark plug.
- Checking the fuel filter.
- Checking the oil level and quality.
- Checking for leaks.
- Lubricating moving parts.
If you are unsure of how to service your Honda GX390 engine, consult your owner's manual or a local dealer.
By following these simple tips, you can help to ensure that your Honda GX390 engine runs smoothly for years to come.
What Are Some Signs That My Honda GX390 Engine Needs Service?
There are a few signs that may indicate that your Honda GX390 engine needs service:
- The engine is making unusual noises.
- It is vibrating more than usual.
- The engine is producing more smoke than usual.
- Finally, the engine is harder to start.
If you notice any of these symptoms, it is good to take your engine to a mechanic or dealer for service.
Final Thoughts
As you can see, the Honda GX390 is no different from any other engine because it needs proper care and maintenance to function correctly. That includes regular servicing, using the right oil, and checking for leaks.
Hopefully, this article has provided you with the information you need to make sure your engine stays happy and healthy. By following these simple tips, you can help to ensure that your Honda GX390 engine runs smoothly for years to come.
Made it to the end? Here are other articles we think you'll enjoy:
Honda Lawn Mower Won’t Start – Potential Causes & Maintenance Tips
What Type Of Oil Is Best For A Craftsman Lawn Mower [And Does It Come With Oil]